Alert / Monitoring Interface
The Beam RST035 alert and monitoring interface delivers a highly intelligent tracking, and monitoring solution, for all market applications.

This interface also supports the Ship Security Alert System (SSAS) and enables anyone to easily and covertly transmit an emergency distress signal to the ship owner and any nominated Authority.

Compliance
The Beam / Iridium SSAS solutions incorporating the RST035 with one of the Beam Remote Satellite Terminals, enables full compliance with all SOLAS XI-2/6 mandated SSAS regulations.

SSAS Interface Equipment
The RST035 is easily connected to the Log Port of the Beam Remote Satellite Terminals, on either model, RST100 or RST200.

Intelligent Configuration
The RST035 is configured through the Intelligent processor onboard the RST terminal. This allows customization of various settings, notification addresses, notification types, test configuration, notification intervals, loop configuration and control.

Iridium Network
Using the Iridium Satellite Network provides 100% global coverage for complete peace of mind. By using the Iridium network in conjunction with the SSAS equipment, it enables Voice, Data, SMS, and Crew Calling services to be accessed.

SSAS Priority
Whilst Beam gives you the flexibility to use the Remote Satellite Terminal for other Iridium Services, in the event of an emergency, the Beam RST’s Intelligence will always give Priority to alerts and terminate any active Voice or Data calls in order to transmit the SSAS alert notification.

RST035 Kit Contents
RST030, install manual / brackets / connectors, SSAS intelligent software interface, first years software license / maintenance.

• Requires External GPS engine
• Supports multiple GPS inputs
• Multiple notification methods: SMS, Short Burst Data (SBD), SBD to 5 email addresses, SMS to email
• Full Test Remote or Local
• Configurable delivery advice
• Intelligent Processor
• Fully configurable
• GPS signal monitoring
• Alert if loss of signal
• Remote test of SSAS
• Remote software download
• SMS confirmation
• Configurable Settings
• SSAS Information
• Alert notification
• Remote or local alert reset
• LED Status for GPS signal and Power / Antenna
• Intelligent alarm buttons
• 4 Individual loops
• Used for Alarm/ Monitoring
• Multiple buttons per loop
• Up to 500m cable length

• Size: 225x110 x45mm
• Weight: 0.8Kg
• Shipping Weight: 1.25Kg
• Operating Temp: 0C to +50C
• Storage Temp: -30C to +70C
• Op’ Humidity: 85% non-condensing

• RST035 Terminal
• Software / Maintenance license
• Mounting Brackets
• Intelligent SSAS Software module
• Interface cable to RST100 or RST200
• User / Install Manuals